PART #2
Here at APC, we’re specialists when it comes to, you know, building PCs. We’ve been doing it for a heck of a long time now. This journalist alone has logged no less than 63 separate build logs, and built many more. Along the way, we’ve picked up a ton of tips and tricks to make the process as painless and seamless as possible.
It’s this knowledge, these ingrained, subtle refined notions and ideas, that have turned even the most challenging of concept system builds into paltry, simple, and easy-to-produce machines of mayhem. They can be crafted on a whim, and knocked out in less than a few hours. Here, we’ll be divulging all that information to you.
We’ve scoured the team’s collective brains and come up with no less than 41 tips and tricks to really max out your next build, or at least make you think about tidying up your current one. Whether you’re a novice or a pro, a gamer or a 3D renderer, there’s something for everyone in APC’s 2024 occasionally annual builder’s manual.
21 SSD or Super-Slick Doodads
For modern M.2 SSDs, installation couldn’t be simpler. Identify where your M.2 slots are, and remove any heatsinks in place (they’ll likely have tiny screws, and be closest to your CPU, or below the PCIe slots on your motherboard). Then, similar to your RAM, locate the notch on the M.2 and the bump in the slot. Slide your M.2 stick in, being sure to secure it if there’s any latch or screw mechanism there. Once done, replace the heatsink, making sure to remove the thermal pad film for maximum performance.
Also, ensure that you’re installing your drive in the correct slot. Some M.2 slots will be PCIe 5.0 standard, while some
