44 min listen
Hoses / Types and Applications w/ NAVAC - Short #198
Hoses / Types and Applications w/ NAVAC - Short #198
ratings:
Length:
17 minutes
Released:
Jun 18, 2024
Format:
Podcast episode
Description
In this short episode of the HVAC School podcast, Bryan talks about hoses and their various types and applications, particularly focusing on NAVAC hoses. Charging hoses (NAVAC: NH5 and NH5L) ideally shouldn't be longer than 5-6 feet, as the longer the hose, the more refrigerant it will hold. Manifold gauges also have leak points, so it's usually better to use probes instead of manifolds to help with charging. Charging hoses with ball valves (NH5S and NH5SC) can help you control the flow and are great for recovery. Whenever you use charging hoses, they will have a core depressor on one side only (usually the 45-degree side, if applicable); the right amount should be exposed, and the seal should be in good shape. Larger-diameter hoses with higher burst pressure are advantageous for recovery (though it's better to have separate hoses for recovery and evacuation). Larger-diameter hoses of a shorter length will allow you to get a higher flow rate, including cases where you have 1/4" connectors (though the F1028 & F1029 Rapid Y connection fittings can help out with those cases where you have 1/4" connectors by giving you the ability to connect two 3/8" hoses); hoses with a diameter of 3/8" are usually the biggest recommended ones for recovery. NAVAC's recovery hoses are the NHR38AA and NHR38AB. Evacuation hoses are even bigger. Some good evacuation hoses include the NH34AB and NH34AC; they are short 3/4" hoses that are vacuum-rated and quite flexible. NAVAC also has smaller hoses, which tend to look more like recovery hoses. You do not want to use 1/4" hoses and core depressors for evacuation, but they are good for charging. Check out all of the hoses NAVAC has to offer at https://navacglobal.com/products-by-category/hoses-kits/. Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool. Purchase your tickets or learn more about the 6th Annual HVACR Training Symposium at https://hvacrschool.com/symposium. Subscribe to our podcast on your iPhone or Android. Subscribe to our YouTube channel. Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.
Released:
Jun 18, 2024
Format:
Podcast episode
Titles in the series (100)
Solder Rings, Thermal Imaging and My Grouchy Brother: This episode of HVAC School is a conversation on the merits and faults of embracing new products. We talk about Brazing with Solder Rings, Thermal Imaging, Micron Gauges, Flowing Nitrogen and why you shouldn't hire techs named Todd. by HVAC School - For Techs, By Techs